Washoe County Department of Water Resources
Standard Details
|
Complete Package - |
||||
| DWG | Detail | Revised | ||
| Complete | Complete | Washoe County DWR Standard Details | 7/6/2011 | |
|
Individual Details - |
||||
| WR-1- Sewer Details | ||||
| DWG | Detail | Revised | ||
| WR-1.1 | WR-1.1 |
Trench Detail (Sanitary Sewer) |
7/1/2009 |
|
| WR-1.2 | WR-1.2 | Cut-Off Collar | 7/1/2009 | |
| WR-1.3 | WR-1.3 | Type I-A Manhole | 5/18/2011 | |
| WR-1.4 | WR-1.4 | Type III-A Manhole | 7/1/2009 | |
| WR-1.5 | WR-1.5 | Type IV-A Manhole | 7/1/2009 | |
| WR-1.6 | WR-1.6 | Type V-A Manhole | 7/1/2009 | |
| WR-1.7 | WR-1.7 | Manhole Steps | 7/1/2009 | |
| WR-1.8 | WR-1.8 | Manhole Collar | 7/1/2009 | |
| WR-1.9 | WR-1.9 | Sewer Lateral | 7/1/2009 | |
| WR-2- Water and Reclaimed Water Details | ||||
| DWG | Detail | Revised | ||
| WR-2.1 | WR-2.1 | Trench Detail (Water) | 7/1/2009 | |
| WR-2.2.1 | WR-2.2.1 | Water Crossing Sewer - Detail | 7/1/2009 | |
| WR-2.2.2 | WR-2.2.2 | Water Crossing Sewer - Notes | 7/1/2009 | |
| WR-2.3 | WR-2.3 | Valve Detail | 7/1/2009 | |
| WR-2.4 | WR-2.4 | 1" Combination Air Release Assembly | 7/1/2009 | |
| WR-2.5 | WR-2.5 | 2" Combination Air Release Assembly | 7/1/2009 | |
| WR-2.6 | WR-2.6 | Fire Hydrant | 7/1/2009 | |
| WR-2.7 | WR-2.7 | 4" Flush Valve Assembly - Terminus | 7/1/2009 | |
| WR-2.8 | WR-2.8 | 4" Flush Valve Assembly - In-line | 7/1/2009 | |
| WR-2.9 | WR-2.9 | Test Station | 7/1/2009 | |
| WR-2.10 | WR-2.10 | Service Tap and Line | 7/1/2009 | |
| WR-2.11.1 | WR-2.11.1 | ¾" Meter Vault (single & double) | 7/1/2009 | |
| WR-2.11.2 | WR-2.11.2 | 1" Meter Vault | 7/1/2009 | |
| WR-2.11.3 | WR-2.11.3 | 1½" & 2" Meter Vaults | 7/1/2009 | |
| WR-2.11.4 | WR-2.11.4 | 3" & 4" Meter Vaults | 7/1/2009 | |
| WR-2.12 | WR-2.12 | Thrust Restraint | 7/1/2009 | |
| WR-2.13 | WR-2.13 | Distribution Tap (Hot Tap) | 7/1/2009 | |
| WR-2.14 | WR-2.14 | Potable Reduced Pressure Backflow Preventer (RPBP) | 7/1/2009 | |
| WR-2.15 | WR-2.15 | Irrigation Reduced Pressure Backflow Preventer | 7/1/2009 | |
| WR-2.16 | WR-2.16 | Double Check Detector Assembly (DCDA) | 7/1/2009 | |
| WR-2.17 | WR-2.17 | Pipe Support | 7/1/2009 | |
| WR-2.18 | WR-2.18 | Pressure Gauge | 7/1/2009 | |
| WR-2.19.1 | WR-2.19.1 | Sample Port in Vault | 7/1/2009 | |
| WR-2.19.2 | WR-2.19.2 | Sample Port in Meter Box | 7/1/2009 | |
| WR-2.19.3 | WR-2.19.3 | Sample Port in Meter Box with Service | 7/1/2009 | |
| WR-2.20 | WR-2.20 | Water Line Lowering | 7/1/2009 | |
| WR-2.21 | WR-2.21 | Reclaimed Water Signage Requirements | 7/1/2009 | |
| WR-3- Water Storage Tank Details | ||||
| DWG | Detail | Revised | ||
| WR-3.1 | WR-3.1 | Typical Tank Elevation | 7/1/2009 | |
| WR-3.2 | WR-3.2 | Typical Tank Plan | 7/1/2009 | |
| WR-3.3 | WR-3.3 | Roof Hatch | 7/1/2009 | |
| WR-3.4 | WR-3.4 | Typical Roof Vent - Center | 7/1/2009 | |
| WR-3.5 | WR-3.5 | Typical Roof Vent - J-Vent | 7/1/2009 | |
| WR-3.6 | WR-3.6 | Tank Inlet/Outlet | 7/1/2009 | |
| WR-3.7 | WR-3.7 | Tank Base - Type 1 (concrete stem wall) | 7/1/2009 | |
| WR-3.8 | WR-3.8 | Tank Base - Type 3 (continuous steel ring) | 7/1/2009 | |
| WR-3.9 | WR-3.9 | Tank Overflow Detail | 7/1/2009 | |
| WR-3.10 | WR-3.10 | Chain Link Fence | 7/1/2009 | |
| WR-3.11 | WR-3.11 | Chain Link Fence - 16' Gate | 7/1/2009 | |